Step 1
Insert the hose into
the inlet end and give a 1/4 turn clockwise to
secure the connection. Simply reverse the procedure
to take the hose out.
Step
2
For blowing out through the hose, insert it into
the exhaust outlet and give a 1/4 turn clockwise
to secure the connection. Simply reverse the procedure
to take the hose out.
Step 3 To change the
exhaust filter firmly lift up the exhaust cover,
remove the used filter, and place a new Technostat
filter in the recessed area. After positioning
the filter close the exhaust cover and snap shut.
Step
4
To change the side exhaust filter, push the small
button to the right to open, remove the used filter,
and place a new Technostat filter in the recessed
area. After positioning the filter, close the side
exhaust cover and snap shut.
Step
5 Place the paper bag directly into the cloth
bag. When the bag is full, flip over the tab near
the bag inlet to stop dirt from escaping during
bag removal. Lift out using the built-in handle
for easy disposal.
Step
6
Insert the hose nozzle into the telescopic wand
handle and click firmly into position.
Step
7
Before storing your cleaning system, always remove
all attachments from the hose, place in their
storage locations and recoil the electric cord.
Step
8
To connect the electronic brush, guide the pig tail
cord attached to the hose into the plug-in. When
finished, pull it out.
